Sustainable Construction
Lorem ipsum dolor...
.jpg)
Ozone Monitor [202]
The 2B Technologies Model 202 Ozone Monitor™ is designed to enable accurate and precise measurements of ozone ranging from low ppb (precision of ~1.5 ppb) up to 250,000 ppb (0-250 ppm) based on the well-established technique of absorption of UV light at 254 nm. Flash card memory and a quiet, long-life internal air pump are now provided standard on the Model 202 Ozone Monitor. The Model 202 Ozone Monitor™ is lightweight (5.5 lb., 2.5 kg.) and has a low power consumption (12V DC, 0.60 amp, 7.2 watt) relative to conventional instruments and is therefore well suited for applications such as:
- Vertical profiling using balloons, kites, RPVs and light aircraft where space and weight are highly limited
- Long-term monitoring at remote locations where power is highly limited
- Urban arrays of ground-based detectors
- Personal exposure monitoring for studies of health effects of air pollutants
- Environmental health and safety monitoring
- Laboratory studies of the effects of ozone exposure on materials and organisms
Specifications
| Measurement Principle | UV Absorption at 254 nm |
| Federal Equivalent Method (FEM) | Yes, EQOA-0410-190 |
| Linear Dynamic Range | 0 to 250 ppm |
| Resolution | 0.1 ppb |
| Precision (1σ; rms noise) | Greater of 1.5 ppb or 2% of reading |
| Accuracy | Greater of 1.5 ppb or 2% of reading |
| Limit of Detection (2σ) | 3.0 ppb (in 10-s measurement mode) |
| NIST-Traceable Calibration | Yes |
| Measurement Interval | 10 s (Data averaging options: 1 min, 5 min, 1 hr) |
| Flow Rate (nominal) | ~1 Liter/min |
| Flow Rate Requirement | >0.6 L/min |
| Baseline Drift | < 2 ppb/day |
| Sensitivity Drift | < 1%/day |
| Measurement Time, Frequency | 10 s, 0.1 Hz |
| Response Time, 100% of Step Change | 20 s, 2 points |
| Averaging Times | 1 min, 5 min, 1 hr |
| Internal Data Logger Capacity | 16,383 lines (10-s meas. = 1.9 days; 1-min avg = 11 days; 5-min avg = 1.9 mo; |
| SD Card Logger Capacity | Minimum 2 GB (> 5-year capacity for 10-s measurement mode) |
| Ozone Units | ppb, ppm, pphm, µg m-3, mg m-3 |
| Pressure Units | mbar, torr |
| Temperature Units | °C, K |
| T and P Corrected | Yes |
| Operating Temperature Range | 0 to 50 °C standard; optional -20 to 50 °C with low temperature modifications (pump and lamp heater cold-weather package) |
| Operating Altitude Range | ~0-13.5 km (150-1,013 mbar) standard; optional ~0-25 km (30-1,013 mbar) with upgraded pressure sensor |
| Power Requirement; | 11-14 V DC or 120/240 V AC, 600 mA, 7.2 watt (6.2 watt with cell heater unplugged) |
| Size | 3.5 x 8.5 x 11 inches (9 x 21 x 29 cm) |
| Weight | 5.5 lb (2.5 kg); 2.8 lb (1.3 kg) without instrument case |
| Analog Inputs for Internal Logging of Other Instruments | 3 Analog Inputs, 0-2.5 V; For example could log external T, P and RH |
| Data Outputs | RS232, 0-2.5 V Analog, LCD Display: (Optional 4-20 mA Current, External USB Converter; request quote) |
| Data Transfer Baud Rates | 2400, 4800, 19200 |
| Output Ranges | User-Defined Scaling Factor in Menu |
| DewLine™ | Yes |
| Quiet Long-Life Internal Air Pump | Yes |
| Flow Meter | Yes |
| Options | Battery; External Particle Filter; Serial-to-USB Converter; GPS; Bluetooth; 4-20 mA Current Output; Cold-Weather Package (pump, lamp heater); High-Altitude Upgrade; Extra-Long-Life Internal Air Pump; Low-Power Option; Rack-Mount Case Configuration |
| Upgradable to Model 205 Dual Beam | Yes |