Fire Escape Hood [Parat Series]

The Dräger PARAT 4700/5500/7500 fire escape hood was developed in cooperation with users – always with the focus on offering the fastest possible escape. Optimized operation and wearing comfort, a robust housing and a tested filter ensure protection from toxic fire-related gases, vapours and particles for at least 15 minutes while escaping.

 

Ready for escape in only 3 steps

Exceptionally innovative and intuitive: When opening the packaging, the filter plug is automatically released from the filter. The filter is then deployed into operational position and the hood can be immediately donned. Thanks to the self-adjusting internal head harness, no additional adjustment is required. All you have to do is: open the packaging, remove the and don hood – and leave the danger zone.

 

Reliable protection

The high-performance combination filter reliably protects against a wide range of toxic fire-related gases, vapours and particles. The CO P2 filter is approved according to the EN standard 403:2004. In addition, the filter is tested for use against H2S (at 2500 ppm) in accordance with DIN 58647-7. The filter is securely sealed with two filter plugs keeping it safe over its long lifetime.

 

16 years of service life

Replacing the filter after 8 years will extend the service life of the Dräger PARAT Escape Hood to 16 years in total. For this, Dräger offers filter replacement service or an expert training for your employees. With the exception of the PARAT 5550 which requires that the complete refill kit be exchanged after 8 years.

 

Robust and ergonomic

Both ergonomics and wearing comfort were considered when designing the packaging of the Dräger PARAT Escape Hoods. The escape hood can be carried with a belt, shoulder strap, grip clip or belt clip. The PARAT Hard Case can also be mounted on the wall using a wallholder. Additionally, the robust packaging of the Dräger PARAT Escape Hoods protects the device from damage.

 

Different packaging types

Depend on different model, you can select between four different packaging types: The Hard Case provides splash water protection (IP54) – the Soft Pack provides dust protection (IP5). The fire pouch is packed in a flame retardant holster – or select the Single Pack with the standard filter plug system. Both, the Hard Case and the Soft Pack have viewing windows to check the filter expiration date and the condition of the device. Particularly convenient: The security seal on the packaging shows if the unit has been opened.

 

Specification

Model	4700	5500	7500
Use	Industrial escape	Fire escape	Combined fire and industrial escape
Filter	ABEK P3 combination filter against toxic industrial gases, vapours and particles	CO P2 combination filter against toxic fire-related gases, vapours and particles	ABEK CO P3 combination filter against toxic gases, vapors, particles and fire-related gases
Standard	according to DIN 58647-7 (filter additionally tested in accordance with EN 14387:2004)	according to EN 403:2004, additionally tested for the use against H2S (at 2,500 ppm) in accordance with DIN 58647-7. PARAT® 5550 additionally approved to EN 137:2006 Type 2	according EN 403:2004 for fire escape hoods, in accordance with DIN 58647-7 for filtering escape devices, filter additionally tested in accordance with EN 14387:2004 for gas filter(s) and combined filter(s)
Period of use	At least 15 minutes	At least 15 minutes	At least 15 minutes
Package	Hard Case, soft pack	Hard Case, soft pack, fire pouch, Single	Hard Case, soft pack