Air Sampling Pump [IAQ-Pro II]

SENSIDYNE model IAQ-Pro II constant flow air sampling pump with unique constant flow technique keeps flow (0.100～0.800mL/min) at constant level even back pressure at 60” H2O (0～15kPa). The IAQ pump can use with impingers/ bubblers and VOC absorbent tube. Widely application in IAQ Measurement, Occupational Hygiene, Ambient Sampling, R&D etc.

 

Feature:

• The fault light indicator activates when the pump flow control is outside +/-5% of the required flow rate, such as from low battery, blocked tubing or filter
• If fault conditions persist for 30-60 seconds, the pump automatically shuts down and automatic restart feature that will attempt to save a sample should a fault occur. If the filter becomes clogged or tubing pinches not allowing air to pass, the pump will shut down and attempt to restart every 3 minutes for up to 30 minutes
• Can program the sampling schedule, say set sampling flow, starting sampling time, pause time, delay time and number of cycles
• Flow range: 0.100-0.800mL/min
• NiMH Rechargeable battery
• Display value: Sampling flow rate, total sampling volume, sampling time and remaining battery
• Unique flow control automatic compensation feature. One calibration can maintain 30 days or 200 hours sampling time without effect of change of temperature and pressure
• Single, double or four-pumps kit selection

 

Specification:

Flow range	0.100～0.800mL/min
Flow control	Better than ±5% of set flow (after calibration) under up to 60”H2O
Display	Sampling flow rate, total sampling volume, sampling time and remaining batter, Pause sign and fault sign
Power	Battery pack: Rechargeable NiMH 7.2V
Operation time	Set flow rate at 500ml/min can run more than 8 hours
Operation Temperature	0～45℃
Dimension	81x137x58mm
Weight	0.581kg